Lldp Notification Remote-Change Enable; Lldp Timer Notification-Interval - HP E4510-48G Command Reference Manual

[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lldp management-address-tlv 192.6.0.1

lldp notification remote-change enable

Syntax
lldp notification remote-change enable
undo lldp notification remote-change enable
View
Ethernet interface view, port group view
Default level
2: System level
Parameters
None
Description
Use the lldp notification remote-change enable command to enable trap for a port or all the ports in
a port group.
Use the undo lldp notification remote-change enable command to restore the default.
By default, trap is disabled on a port.
Examples
# Enable LLDP trap for GigabitEthernet1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lldp notification remote-change enable

lldp timer notification-interval

Syntax
lldp timer notification-interval interval
undo lldp timer notification-interval
View
System view
Default level
2: System level
Parameters
interval: Interval to send LLDP trap messages, in the range 5 to 3600 (in seconds).
5-22