Installing the CPM1
3-3-3 Connecting an Expansion I/O Unit or Analog I/O Unit
1, 2, 3...
Either an Expansion I/O Unit or Analog I/O Unit can be connected to the CPM1's
CPU Unit. Use the following procedure.
The procedure is the same for either Unit; an Expansion I/O Unit is used as an
example in the following description.
1. Remove the cover from the CPU Unit's Expansion I/O Unit Connector.
2. Insert the Expansion I/O Unit's Connecting Cable into the CPU Unit's
Expansion I/O Unit Connector.
3. Replace the cover on the CPU Unit's Expansion I/O Unit Connector.
Section 3-3
Expansion I/O Unit
connector cover
33