7.2
Inverter control
7.2.1
Adapt inputs and outputs
This chapter describes how you adapt the function of individual digital and analog inputs and
outputs of the inverter.
Figure 7-2
7.2.1.1
Digital inputs
Changing the function of a digital input
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
Internal interconnection of the inputs and outputs
Interconnect the status parameter of the digital input with a
binector input of your choice.
Binector inputs are marked with "BI" in the parameter list of
the List Manual.
Advanced commissioning
7.2 Inverter control
117