Fujitsu FR60 Hardware Manual page 324

32-bit microcontroller mb91301 series

Hide thumbs Also See for FR60:

Table of Contents

CHAPTER 7 PPG TIMER

■ When the 16-bit Reload Timer is Used for Activation

Specify the 16-bit reload timer as a source in GCN10 (see 3) above). Start the 16-bit reload

timer instead of writing data to GCN20 in 5) above.

In addition, set the control status register as follows:

RTRG: 1 --> Enables restart.

EGS1, EGS0:11 --> Enables activation by both edges

By setting 16-bit reload timer output to toggle mode, the PPG timer can be restarted at fixed