Fujitsu FR60 Hardware Manual page 17

Main changes in this edition
Page
Part number is deleted.
-
(MB91301, MB91V301)
Table is changed in ■ Features of the MB91301 Series.
2
(MB91301 is changed.)
MB91301 and MB91V301are deleted in ■ Product Line-up is changed.
6
7 Figure 1.2-1 Block Diagram is changed.
Summary is changed in 1.3 Package Dimensions.
(The MB91301 series is available in one type of package. → The MB91301 series is available in three
8
types of package.)
Figure 1.4-2 Pin Layout of the MB91302A is changed.
12
(FPT-144P-M08 is added.)
Pin Name is changed in Table 1.5-1 MB91V301A Pin No. Table (Package: PGA-179C-A03) (1 / 2).
13
No.49(LABA → LBA)
Pin name and Function are changed in the Pin No. 42 of Table 1.6-1 List of Pin Function (except for Power
17 Supply, and GND Pins) (3 / 10).
(SWR → SWE)
■ Quartz Oscillation Circuit is changed.
32 (Added the description; Please ask the crystal maker to evaluate the oscillational characteristics of the
crystal and this device.)
❍ Notes on during operation of PLL clock mode is changed.
33
❍ Low-power consumption mode is changed.
(Deleted the description; In addition, please set I flag, ILM, and ICR to diverge to the interruption handler
34
that is the return factor after the standby returns.)
(1) is changed in ❍ Low-power consumption mode.
Figure 3.1-1 Memory Map is changed.
43
(Figure is renewed.)
❍ Initialization is changed.
60
(ldi #0x000003C7, r0 → ldi #0x000003E7, r0)
Table 3.10-4 Vector Table is changed.
(Instruction break exception → Reserved for system)
85, 87
(Operand break trap → Reserved for system)
(Deleted the description; * : Reserved for system (MB91301, MB91V301))
■ Watchdog Reset is changed.
(Unless A5
97
ten to the timebase counter clear register (CTBR))
Changes (For details, refer to main body.)
is written to the watchdog reset postpone register (WPR) → Unless A5
/5A
H H
xiii
/5A is writ-
H H