Initial Settings For Softune Workbench And Realos/Fr - Fujitsu FR60 Hardware Manual

CHAPTER 20 REAL-TIME OS EMBEDDED MB91302A-010 USER'S GUIDE

20.6 Initial Settings for SOFTUNE Workbench and REALOS/FR

SOFTUNE Workbench and REALOS/FR are used to develop programs.
This section describes initial settings for tools using practical examples.
■ Program Example
The following sample program is discussed here to explain tool initialization.
❍ User Tasks
$ Number of tasks
$Stack size
$ Initial situation
$ Startup prioritized
❍ Semaphore
$ Number of semaphores
$Semaphore count
❍ Event flag
$ Number of flags
$ Initial pattern
❍ Mailbox
Number of boxes
❍ Interrupt vector
$ Use reload timer 0 for the system clock.
❍ Memory
$ Code ROM
$ Work RAM
522
50
0x1000 (per task)
task ID1 to ID40 -> READY
task ID41 to ID50 -> DORMANT
task ID1 to ID30 -> 1
task ID31 to ID50 -> 2
20
semaphore ID1 to ID10-> maximum value 15; Initial value 0
semaphore ID11 to ID20-> maximum value 20; Initial value 0
32
semaphore ID1 to ID16-> 0x0000
semaphore ID17 to ID32-> 0xFFFF
10
-> Timer handler name _timer
0x40000000 - 0x403FFFFF (CS0 area x 16 bits)
0x10000000 - 0x10FFFFFF