Access-List (Numbered Hardware Acl For Mac Addresses) - Allied Telesis x510-28GTX Command Reference Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
- (
ACCESS LIST NUMBERED HARDWARE
access-list (numbered hardware ACL for
MAC addresses)
Overview This command creates an access-list for use with hardware classification. The
access-list will match on packets that have the specified source and destination
MAC addresses. You can use the value any instead of source or destination address
if an address does not matter.
Once you have configured the ACL, you can use the
access-group
The no variant of this command removes the specified MAC hardware filter
access-list.
access-list <4000-4699> <action> {<source-mac>|any}
Syntax
{<dest-mac>|any} [vlan <1-4094>] [inner-vlan <1-4094>]
no access-list <4000-4699>
C613-50170-01 Rev B
L (ACL) C
IST OMMANDS
ACL MAC )
FOR ADDRESSES
command to apply this ACL to a port, VLAN or QoS class-map.
Parameter Description
<4000-4699>
Hardware MAC access-list.
<action>
The action that the switch will take on matching packets:
deny
permit
copy-to-cpu
copy-to-mirror
send-to-mirror
send-to-vlan-port
vlan <vid> port
<port-number>
send-to-cpu
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
access-group or the
Reject packets that match the source
and destination filtering specified with
this command.
Permit packets that match the source
and destination filtering specified with
this command.
Send a copy of matching packets to
the CPU.
Send a copy of matching packets to
the mirror port.
Use the mirror interface command to
configure the mirror port.
Send matching packets to the mirror
port.
Use the mirror interface command to
configure the mirror port.
Send matching packets to the
specified port, tagged with the
specified VLAN. The specified port
must belong to the specified VLAN.
Send matching packets to the CPU.
match
1480