Show Ip Pim Dense-Mode Nexthop - Allied Telesis x510-28GTX Command Reference Manual

PIM-DM C
OMMANDS
-
SHOW IP PIM DENSE MODE NEXTHOP

show ip pim dense-mode nexthop

Overview This command displays the next hop information as used by PIM-DM. In the
context of PIM-DM, the term ' next hop' refers to the next hop router on the path
back to the source address of a multicast stream.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip pim dense-mode nexthop
Syntax
Mode User Exec and Privileged Exec
awplus#
Example
Output Figure 35-7: Example output from the show ip pim dense-mode neighbor
Destination Nexthop
Num
192.168.10.52 1
Table 2: Parameters in the output of the show ip pim dense-mode neighbor
C613-50170-01 Rev B
show ip pim dense-mode nexthop
nexthop command
Nexthop
Addr
0.0.0.0
nexthop command
Parameter
Destination
Nexthop Num
Nexthop Addr
Nexthop Interface
Metric
Preference
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Nexthop Metric Pref
Interface
vlan2 3
Description
Destination address for which PIM-DM requires next hop
information.
Number of next hops to the destination. PIM can only use
one next hop.
Address of the current next hop gateway.
Name of the next hop interface.
Metric of the route towards the destination.
Preference of the route towards the destination.
"Getting Started
Guide.
1 
1461