Show Ip Pim Dense-Mode Neighbor - Allied Telesis x510-28GTX Command Reference Manual

PIM-DM C
OMMANDS
-
SHOW IP PIM DENSE MODE NEIGHBOR

show ip pim dense-mode neighbor

Overview This command displays PIM-DM neighbor information.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip pim dense-mode neighbor
Mode User Exec and Privileged Exec
Usage The total number of PIM-DM neighbors is restricted to 500 PIM-DM neighbors.
When the 500 PIM-DM neighbor limit is reached, as a result of receiving hello
packets from new PIM-DM neighbors, a log entry will be issued to the log file in the
below format:
Example awplus#
Output Figure 35-5: Example output from the show ip pim dense-mode neighbor
C613-50170-01 Rev B
<date> <time> <facility>.<severity> <program[<pid>]>: <message> 
----------------------------------------------------------------
2008 Dec 10 00:58:39 user.err x908 PIM-DM[1150]: [VIF] Nbr 
Create: Cannot create more than 500 neighbours - ignoring 
neighbour 100.0.1.247/32 on vlan100
show ip pim dense-mode neighbor
command
Total number of neighbors: 500
Neighbor-Address Interface
192.168.1.152 vlan2
192.168.1.149 vlan2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
Uptime/Expires Ver
17:15:42/00:01:28 v2
17:15:34/00:01:34 v2

1459