Toshiba e-STUDIO206L Service Manual page 1167

Sub
05/08 Mode Element
element
08 Setting Printer Laser
mode
08 Setting Printer Paper Default setting of
mode feeding paper source
08 Setting Printer Feeding Automatic change of
mode system/Pa paper source
per
transport
08 Setting Printer Laser
mode
08 Setting Printer Laser
mode
08 Setting Printer Laser
mode
08 Setting Printer Laser
mode
e-STUDIO206L/256/306/356/456/506
Item Subitem Code
4009
PPC 4010
Auto 4011
4012
4013
4014
4015
Sub- Default Acceptable
Details
code value value
Setting of polygonal 3 0~3
motor type
0 0~5
PPC 1 1~2
Pre-running rotation 0 0~2
of polygonal motor
Polygonal motor 0 0~1
rotational status
switching at the Auto
Clear Mode
Rotational status of 1 0~1
polygonal motor on
standby
Timing of auto- 3 0~6
clearing of polygonal
motor pre-running
rotation
35
RAM Contents
M Set the type of polygonal motor.
0: 2-clock type 1: 3-clock type 2: 4-clock type 3: 6-clock
type
SYS 0: A4/LT 1: LCF 2: Upper drawer 3: Lower drawer 4:
PFP upper drawer 5: PFP lower drawer
SYS Sets whether or not changing the drawer automatically
to the other drawer with the paper of the same size
when paper in the selected drawer has run out.
1: Changes to the drawer with the same paper direction
and size: e.g., A4 to A4
2: Changes to the drawer with the same paper size.
Paper with the different direction is acceptable as long
as the size is the same: e.g., A4 to A4-R, LT-R to LT.
"1"is applied when the staple/hole-punch is specified.
SYS Sets whether or not switching the polygonal motor from
the standby rotation to the normal rotation when the
original is set on the RADF or the original cover is
opened.
0: Valid (when using RADF and the original is set
manually)
1: Invalid
2: Valid (when using RADF only)
SYS Sets whether or not switching the polygonal motor from
the normal rotation to the standby rotation at the Auto
Clear Mode. 0: Valid 1: Invalid
SYS Sets the rotational status of polygonal motor on
standby.
0: Rotated (The rotational speed is set at 08-4005.)
1: Stopped
SYS Switches the polygonal motor to the standby rotation
when a certain period of time has passed from the pre-
running. At this code, the period to switch the status to
the standby rotation is set.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec. 5:
40 sec. 6: 45 sec.
* This setting is effective when "0" or "2" is set at 08-
4012.
Proc Service
edure UI
1
1
1 Yes
1
1
1
1