Wids Access Point Rf Security Commands - D-Link DWS-4000 Series Cli Command Reference

D-Link Unified Switch CLI Command Reference
WIDS A
CCESS
The commands in this section provide views and management of data maintained for the Wireless Intrusion Detection
System (WIDS) for RF Security.
wids-security admin-config-rogue
(Administrator-configured rogue detection.) If the local database indicates that an AP is rogue, use this command to report
the AP as rogue in the RF Scan.
Default Enable
Format
wids-security admin-config-rogue
Mode Wireless Config
wids-security ap-chan-illegal
(AP is operating on an illegal channel Rogue Detection.) Use this command to enable rogue reporting for AP's operating on
an illegal channel.
Default Enable
Format
wids-security ap-chan-illegal
Mode Wireless Config
no wids-security ap-chan-illegal
Use this command to disable the mode to report APs operating on an illegal channel.
Format
no wids-security ap-chan-illegal
Mode Wireless Config
wids-security ap-de-auth-attack
(AP de-authentication attack.) Use this command to enable the AP de-authentication attack.
Default Disable
Format
wids-security ap-de-auth-attack
Mode Wireless Config
no wids-security ap-de-auth-attack
Use this command to disable the AP de-authentication attack.
Format
no wids-security ap-de-auth-attack
Mode Wireless Config
© 2009 D-Link Corporation. All Rights Reserved
322
P RF S
OINT ECURITY
C
OMMANDS