D-Link DWS-4000 Series Cli Command Reference page 379

Parameter Description
user-id User ID from 1 to 128 characters.
octets Number of bytes.
no user max-input-octets
Use this command to set to the default the number of octets in bytes that the user is allowed to transmit.
Format
no user <user-id> max-input-octets
Mode Captive Portal Config
user max-output-octets
This command is used to limit the number of octets in bytes that the user is allowed to receive. After this limit has been
reached, the user will be disconnected. 0 octets denote unlimited transmission.
Default 0
Format
user <user-id> max-output-octets <octets>
Mode Captive Portal Config
Parameter Description
user-id User ID from 1 to 128 characters.
octets Number of bytes.
no user max-output-octets
Use this command to set to the default the number of octets in bytes that the user is allowed to receive.
Format
no user <user-id> max-output-octets
Mode Captive Portal Config
user max-total-octets
This command is used to limit the number of octets in bytes that the user is allowed to transmit and receive. The maximum
number of octets is the sum of octets transmitted and received. After this limit has been reached, the user will be
disconnected. 0 octets denote unlimited transmission.
Default 0
Format
user <user-id> max-total-octets <octets>
Mode Captive Portal Config
Parameter Description
user-id User ID from 1 to 128 characters.
Captive Portal Local User Commands
371