Virtual Lan Routing Commands - D-Link DWS-4000 Series Cli Command Reference

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

D-Link Unified Switch CLI Command Reference
V
LAN R
IRTUAL
This section describes the commands you use to view and configure VLAN routing and to view VLAN routing status
information.
vlan routing
This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 3965.
Format
vlan routing <vlanid>
Mode
VLAN Config
no vlan routing
This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 3965.
Format
no vlan routing <vlanid>
Mode
VLAN Config
show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled.
Format
show ip vlan
Modes
• Privileged EXEC
• User EXEC
Term
Definition
MAC Address used
The MAC Address associated with the internal bridge-router interface (IBRI). The same MAC Address
by Routing VLANs
is used by all VLAN routing interfaces. It will be displayed above the per-VLAN information.
VLAN ID
The identifier of the VLAN.
Logical Interface
The logical slot/port associated with the VLAN routing interface.
IP Address
The IP address associated with this VLAN.
Subnet Mask
The subnet mask that is associated with this VLAN.
© 2009 D-Link Corporation. All Rights Reserved
180
C
OUTING
OMMANDS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents