D-Link DWS-4000 Series Cli Command Reference page 453

network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool on the server. Network-number is a
valid IP address, made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Mask is the IP subnet
mask for the specified address pool. The prefix-length is an integer from 0 to 32.
Default none
Format
network <networknumber> [{<mask> | <prefixlength>}]
Mode DHCP Pool Config
no network
This command removes the subnet number and mask.
Format
no network
Mode DHCP Pool Config
bootfile
The command specifies the name of the default boot image for a DHCP client. The <filename> specifies the boot image
file.
Format
bootfile <filename>
Mode DHCP Pool Config
no bootfile
This command deletes the boot image name.
Format
no bootfile
Mode DHCP Pool Config
domain-name
This command specifies the domain name for a DHCP client. The <domain> specifies the domain name string of the client.
Default none
Format
domain-name <domain>
Mode DHCP Pool Config
no domain-name
This command removes the domain name.
Format
no domain-name
Mode DHCP Pool Config
DHCP Server Commands
445