D-Link DWS-4000 Series Cli Command Reference page 10

Hide thumbs Also See for DWS-4000 Series:

Table of Contents

D-Link Unified Switch CLI Command Reference

Devices that are capable of switching Layers 2, 3, and 4 are increasingly in demand. Unified Switch software provides a

flexible solution to these ever-increasing needs.

Unified Switch software includes a set of comprehensive management functions for managing both Unified Switch software

and the network. You can manage the Unified Switch software by using one of the following three methods:

Command-Line Interface (CLI)

Simple Network Management Protocol (SNMP)

Each of the Unified Switch management methods enables you to configure, manage, and control the software locally or

remotely using in-band or out-of-band mechanisms. Management is standards-based, with configuration parameters and a

private MIB providing control for functions not completely specified in the MIBs.