D-Link DWS-4000 Series Cli Command Reference page 458

D-Link Unified Switch CLI Command Reference
Term Definition
IP address The IP address of the client.
Hardware Address The MAC Address or the client identifier.
Lease expiration The lease expiration time of the IP address assigned to the client.
Type The manner in which IP address was assigned to the client.
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If no IP address is specified, the
bindings corresponding to all the addresses are displayed.
Format
show ip dhcp global configuration
Modes • Privileged EXEC
• User EXEC
Term Definition
Service DHCP The field to display the status of dhcp protocol.
Number of Ping The maximum number of Ping Packets that will be sent to verify that an ip address id not already
Packets assigned.
Conflict Logging Shows whether conflict logging is enabled or disabled.
BootP Automatic Shows whether BootP for dynamic pools is enabled or disabled.
show ip dhcp pool configuration
This command displays pool configuration. If all is specified, configuration for all the pools is displayed.
Format
show ip dhcp pool configuration {<name> | all}
Modes • Privileged EXEC
• User EXEC
Field Definition
Pool Name The name of the configured pool.
Pool Type The pool type.
Lease Time The lease expiration time of the IP address assigned to the client.
DNS Servers The list of DNS servers available to the DHCP client .
Default Routers The list of the default routers available to the DHCP client
The following additional field is displayed for Dynamic pool type:
Field Definition
Network The network number and the mask for the DHCP address pool.
© 2009 D-Link Corporation. All Rights Reserved
450