D-Link DWS-4000 Series Cli Command Reference page 413

Match All...................................... TRUE
Mirror Interface............................... 0/3
show access-lists
This command displays IP ACLs, IPv6 ACLs, and MAC access control lists information for a designated interface and
direction.
Format
show access-lists interface <slot/port> in
Mode Privileged EXEC
Term Definition
ACL Type Type of access list (IP, IPv6, or MAC).
ACL ID Access List name for a MAC or IPv6 access list or the numeric identifier for an IP access list.
Sequence Number An optional sequence number may be specified to indicate the order of this access list relative to other
access lists already assigned to this interface and direction. A lower number indicates higher
precedence order. If a sequence number is already in use for this interface and direction, the specified
access list replaces the currently attached access list using that sequence number. If the sequence
number is not specified by the user, a sequence number that is one greater than the highest sequence
number currently in use for this interface and direction is used. Valid range is (1 to 4294967295).
Example: The following shows example CLI display output for the command.
(DWS-4026) TBD
IP Access Control List Commands
405