D-Link DWS-4000 Series Cli Command Reference page 247

Default The default password is blank.
Format
password encrypted <password>
Mode AP Config
Parameter Description
password The password in encrypted format, 128 hexadecimal characters.
profile
This command configures the AP profile to be used to configure this AP. The profile configuration is used only if the AP mode
is Unified Switch-managed.
Default 1 - Default
Format
profile <1-16>
Mode AP Config
Parameter Description
1-16 Indicates the AP profile ID for AP configuration.
no profile
The no version of this command sets the current profile ID for the AP to the default profile.
Format
no profile
Mode AP Config
radio
This command allows you to configure fixed channel and/or power settings for a radio on the AP. If the channel is not valid
for the physical mode configured within the AP configuration profile, this configuration is ignored.
Default channel 0 (auto), power 0 (auto)
Format
radio <1-2> {channel <channel> | power <0-100>}
Mode AP Config
Parameter Description
1-2 The radio interface on the AP.
channel 0 (auto) or a fixed channel for the radio. The valid range is based on the configured country code.
0-100 0 (auto) or a fixed transmit power for the radio. The value is entered as % of maximum power.
standalone channel (Stand-alone AP expected channel)
This command configures the expected channel for an AP in stand-alone mode.
Local Access Point Database Commands
239