D-Link DWS-4000 Series Cli Command Reference page 427

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

forwarding database table. Use the interface <slot/port> parameter to view MAC addresses on a specific interface.
Use the vlan <vlan_id> parameter to display information about MAC addresses on a specified VLAN.
Format
show mac-addr-table [{<macaddr> <vlan_id> | all | count | interface <slot/port>
| vlan <vlan_id>}]
Mode
Privileged EXEC
The following information displays if you do not enter a parameter, the keyword all, or the MAC address and VLAN ID. If you
enter vlan <vlan_id>, only the Mac Address, Interface, and Status fields appear.
Term
Definition
Mac Address
A unicast MAC address for which the switch has forwarding and or filtering information. The format is
6 or 8 two-digit hexadecimal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes.
Interface
The port through which this address was learned.
Interface Index
This object indicates the ifIndex of the interface table entry associated with this port.
Status
The status of this entry. The meanings of the values are:
• Static —The value of the corresponding instance was added by the system or a user when a static
MAC filter was defined. It cannot be relearned.
• Learned —The value of the corresponding instance was learned by observing the source MAC
addresses of incoming traffic, and is currently in use.
• Management —The value of the corresponding instance (system MAC address) is also the value of
an existing instance of dot1dStaticAddress. It is identified with interface 0/1. and is currently used
when enabling VLANs for routing.
• Self —The value of the corresponding instance is the address of one of the switch's physical
interfaces (the system's own MAC address).
• GMRP Learned —The value of the corresponding was learned via GMRP and applies to Multicast.
• Other —The value of the corresponding instance does not fall into one of the other categories.
If you enter the interface <slot/port> parameter, in addition to the MAC Address and Status fields, the following field
appears:
Term
Definition
VLAN ID
The VLAN on which the MAC address was learned.
The following information displays if you enter the count parameter:
Term
Definition
Dynamic Address
Number of MAC addresses in the forwarding database that were automatically learned.
count
Static Address
Number of MAC addresses in the forwarding database that were manually entered by a user.
(User-defined)
count
Total MAC
Number of MAC addresses currently in the forwarding database.
Addresses in use
Total MAC
Number of MAC addresses the forwarding database can handle.
Addresses
available
System Information and Statistics Commands
419

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents