D-Link DWS-4000 Series Cli Command Reference page 217

Example: The following shows examples of the command.
(DWS-4026) #radius server-name auth
<cr> Press Enter to execute the command.
(DWS-4026) #no radius server-name auth ?
<cr> Press Enter to execute the command.
(DWS-4026) #radius server-name acct
<cr> Press Enter to execute the command.
(DWS-4026) #no radius server-name acct
<cr> Press Enter to execute the command.
radius accounting (Wireless Config)
This command configures global RADIUS accounting mode for wireless clients.
Default Disable
Format
radius accounting
Mode Wireless Config
no radius accounting (Wireless Config)
The no version of this command disables global RADIUS accounting mode for wireless clients.
Format
no radius accounting
Mode Wireless Config
Example: The following shows examples of the commands.
(DWS-4026) # radius accounting ?
<cr> Press Enter to execute the command.
(DWS-4026) # no radius accounting ?
<cr> Press Enter to execute the command
mac-authentication-mode
This command configures the client MAC authentication mode for the switch. The mode indicates whether MAC addresses
in the Known Client database are granted or denied access. The MAC authentication mode is applied to the known client
database configured either locally or on the RADIUS server.
Default white-list
Format
mac-authentication-mode {white-list | black-list}
Mode Wireless Config
Parameter Description
white-list The access is granted only to clients with MACs in the Known Client database.
black-list The access is denied to clients with MACs in the known client database.
"Wireless_Auth-Server 1" ?
"Wireless_Acct_Server 1" ?
?
Unified Switch Commands
209