D-Link DWS-4000 Series Cli Command Reference page 477

Format
show sflow agent
Mode Privileged EXEC
Field Description
sFlow Version Uniquely identifies the version and implementation of this MIB. The version string must have the
following structure: MIB Version; Organization; Software Revision where:
• MIB Version: 1.3, the version of this MIB.
• Organization: D-Link Corporation.
• Revision: D-Link UWS Software version
IP Address The IP address associated with this agent.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show sflow agent
sFlow Version.................................. 1.3;D-Link Corporation;1.0
IP Address..................................... 10.131.12.66
show sflow pollers
Use this command to display the sFlow polling instances created on the switch. Use "-" for range.
Format
show sflow pollers
Mode Privileged EXEC
Field Description
Poller Data Source The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports only.
Receiver Index The sFlowReceiver associated with this sFlow counter poller.
Poller Interval The number of seconds between successive samples of the counters associated with this data source.
show sflow receivers
Use this command to display configuration information related to the sFlow receivers.
Format
show sflow receivers [<index>]
Mode Privileged EXEC
Field Description
Receiver Index The sFlow Receiver associated with the sampler/poller.
Owner String The identity string for receiver, the entity making use of this sFlowRcvrTable entry.
Time Out The time (in seconds) remaining before the receiver is released and stops sending samples to sFlow
receiver.
Max Datagram Size The maximum number of bytes that can be sent in a single sFlow datagram.
Port The destination Layer4 UDP port for sFlow datagrams.
sFlow Commands
469