Basic Installation; Hardware Setup; Configure The Access Point - D-Link NUCLIAS CONNECT DAP-2610 Manual

D-Link DAP-2610 User Manual

Basic Installation

Hardware Setup

To power on the DAP-2610, you can use ONE of the following methods:
1. Plug one end of your Ethernet cable into the LAN port of the DAP-2610, and the other end into a port on a 802.3af PoE switch.
2. Separately purchase a DPE-301GI PoE injector if you need to connect the Access Point without a 802.3af PoE Switch.
3. Separately purchase a power adaptor to plug into the power receptor of the DAP-2610

Configure the Access Point

Computer with DHCP Server Computer with DHCP Server
Computer with DHCP Server
8