Vlan Commands - D-Link DWS-4000 Series Cli Command Reference

D-Link Unified Switch CLI Command Reference
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree instance. The <vlanid> corresponds
to an existing VLAN ID.
Format
show spanning-tree vlan <vlanid>
Mode • Privileged EXEC
• User EXEC
Term Definition
VLAN Identifier The VLANs associated with the selected MST instance.
Associated Identifier for the associated multiple spanning tree instance or "CST" if associated with the common
Instance and internal spanning tree.
VLAN C
OMMANDS
This section describes the commands you use to configure VLAN settings.
vlan database
This command gives you access to the VLAN Config mode, which allows you to configure VLAN characteristics.
Format
vlan database
Mode Privileged EXEC
network mgmt_vlan
This command configures the Management VLAN ID.
Default 1
Format
network mgmt_vlan <1-3965>
Mode Privileged EXEC
no network mgmt_vlan
This command sets the Management VLAN ID to the default.
Format
no network mgmt_vlan
Mode Privileged EXEC
© 2009 D-Link Corporation. All Rights Reserved
32