Table of Contents
Advertisement
Field
Description
Auth Threshold
The maximum number of authentication messages the client can send without being reported as
Value
rogue.
Probe Threshold
The number of seconds for counting the probe messages.
Interval
Probe Threshold
The maximum number of probe messages the client can send without being reported as rogue.
Value
Auth Failure
The maximum number of authentication failures that triggers the client to be reported as rogue.
Threshold
Known DB
The location of the Known-Client database for detected clients.
Location
Known DB Radius
The name of the radius-server for the Known-Client database, defined for detected clients.
Server Name
Known DB Radius
Indicates whether or not a radius server for the Known-Client database is configured.
Server Status
Example: The following shows example CLI display output for the command.
(DWS-4026) # show wireless wids-security client
Rogue detected trap interval................... 300 seconds
Rogue-Not in Known Client list................. Disable
Rogue-Exceeds Auth Req ........................ Enable
Rogue-Exceeds DeAuth Req ...................... Enable
Rogue-Exceeds Probe Req ....................... Enable
Rogue-Exceeds Failed auth ..................... Enable
Rogue-Auth with unknown AP..................... Disable
Client Threat Mitigation....................... Disable
De-auth threshold interval..................... 60 seconds
De-auth threshold value........................ 10
Auth threshold interval........................ 60 seconds
Auth threshold value........................... 10
Probe threshold interval....................... 60 seconds
Probe threshold value.......................... 120
Auth failure threshold......................... 5
Known DB Location.............................. Local
Known DB Radius Server Name.................... Default-RADIUS-Server
Known DB Radius Server Status.................. Not Configured
show wireless wids-security client rogue-test-descriptions
Use this command to display the WIDS Client rogue classification test identifier descriptions.
Format
show wireless wids-security client rogue-test-descriptions
Mode
Privileged EXEC
Example: The following shows example CLI display output for the command.
(DWS-4026) # show wireless wids-security client rogue-test-descriptions
WIDSCLIENTROGUE01.........Client not listed in the Known Clients database
WIDSCLIENTROGUE02.........Client exceeds configured rate for transmitting 802.11
WIDSCLIENTROGUE03.........Client exceeds configured rate for transmitting probe requests
authentication requests
Detected Clients Database Commands
343
Advertisement
Table of Contents
