D-Link DWS-4000 Series Cli Command Reference page 258

D-Link Unified Switch CLI Command Reference
Default 1
Format
wep tx-key <1-4>
Mode Network Config
Parameter Description
1-4 A valid WEP key index value.
no wep tx-key
The no version of this command sets the WEP transmit key index to its default value.
Format
no wep tx-key
Mode Network Config
wep key type
This command configures the WEP key type for the network. The configured key type is used when the network security
mode is set to WEP shared key. The WEP key type affects the number of characters required for a valid WEP key, and
therefore changing the WEP key length will reset all keys.
Default ASCII
Format
wep key type {ascii | hex}
Mode Network Config
Parameter Description
ascii Set WEP key type to ASCII.
hex Set WEP key type to hexadecimal.
no wep key type
The no version of this command returns the WEP key type to its default value.
Format
no wep key type
Mode Network Config
wep key length
This command configures the WEP key length in bits for the network. The configured key length is used when the network
security mode is set to WEP shared key. The WEP key length affects the number of characters required for a valid WEP
key, and therefore changing the WEP key length will reset all keys.
Default 128
Format
wep key length {64 | 128}
Mode Network Config
© 2009 D-Link Corporation. All Rights Reserved
250