Section 6: Captive Portal Commands; Captive Portal Global Commands - D-Link DWS-4000 Series Cli Command Reference

S e c ti o n 6 : C a pt i v e P o r ta l C om m a n d s
This section describes the CLI commands you use to manage the Captive Portal features on the switch.
This section contains the following subsections:
• "Captive Portal Global Commands" on page 345
• "Captive Portal Configuration Commands" on page 351
• "Captive Portal Status Commands" on page 359
• "Captive Portal Client Connection Commands" on page 362
• "Captive Portal Interface Commands" on page 365
• "Captive Portal Local User Commands" on page 367
• "Captive Portal User Group Commands" on page 374
C P
APTIVE ORTAL
The commands in this section enable you to configure the captive portal settings that affect the captive portal feature on the
switch and all captive portal instances.
captive-portal
Use this command to enter the Captive Portal Configuration Mode.
Format
captive-portal
Mode Global Config
enable (Captive Portal Config Mode)
This command globally enables the captive portal feature on the switch.
Default Disable
Format
enable
Mode Captive Portal Config
no enable (Captive Portal Config Mode)
The no version of this command disables the captive portal functionality.
Format
no enable
Mode Captive Portal Config
G C
LOBAL OMMANDS
Captive Portal Commands
345