D-Link DWS-4000 Series Cli Command Reference page 218

D-Link Unified Switch CLI Command Reference
known-client
This command configures a client MAC address in the local Known Client database. The action indicates whether to grant,
deny, or use global action for MAC authentication of the client.
Format
known-client <macaddr> [name <name>] [action {global-action | grant | deny}]
Mode Wireless Config
Parameter Description
macaddr A valid MAC address.
name An alphanumeric string up to 32 characters in length.
global-action Default authentication action is global-action. Apply global action to the client.
grant Grant access to the client.
deny Deny access to the client.
no known-client
The no version of this command deletes an entry from the local Known Client database.
Format
no known-client <macaddr>
Mode Wireless Config
show wireless
This show command displays the configured Unified Switch global parameters and the operational status.
Format
show wireless
Mode • Privileged EXEC
• User EXEC
Field Description
Administrative Shows whether the administrative mode is enabled.
Mode
WLAN Switch Shows whether the wireless function on the switch is enabled.
Operational Mode
WS IP Address Shows the IP address of the switch. If the routing package is enabled, this address belongs to a routing
or loopback interface.
AP Authentication Shows whether the AP must be authenticated by using the local database or a RADIUS database.
Mode
AP Auto Upgrade Shows whether the Auto Upgrade feature is enabled or disabled.
Mode
AP Validation Shows whether to use the local or RADIUS server database for AP validation.
Method
Client Roam Shows how long to wait before a client that disassociates from this AP or a neighbor AP must re-
Timeout (secs) authenticate when it associates again.
© 2009 D-Link Corporation. All Rights Reserved
210