D-Link DWS-4000 Series Cli Command Reference page 150

Hide thumbs Also See for DWS-4000 Series:

Table of Contents

D-Link Unified Switch CLI Command Reference

show lldp med

Use this command to display a summary of the current LLDP MED configuration.

show lldp med

Privileged Exec

Example: The following shows example CLI display output for the command.

(DWS-4026) #show lldp med

LLDP MED Global Configuration

Fast Start Repeat Count:

Device Class:

Network Connectivity

(DWS-4026) #

show lldp med interface

Use this command to display a summary of the current LLDP MED configuration for a specific interface. <slot/port>

indicates a specific physical interface. all indicates all valid LLDP interfaces.

show lldp med interface {<slot/port> | all}

Privileged Exec

Example: The following shows example CLI display output for the command.

(DWS-4026) #show lldp med interface all

TLV Codes: 0- Capabilities,

2- Location,

4- Extended Pd,

--More-- or (q)uit

(DWS-4026) #show lldp med interface 0/2

configMED operMED

--------- --------

1- Network Policy

3- Extended PSE

5- Inventory

configMED operMED

--------- --------

ConfigNotify TLVsTx

------------ -----------

ConfigNotify TLVsTx

------------ -----------