D-Link DWS-4000 Series Cli Command Reference page 526

Hide thumbs Also See for DWS-4000 Series:

Table of Contents

D-Link Unified Switch CLI Command Reference

The following lines show an example of a script:

! Script file for displaying management access

show telnet !Displays the information about remote connections

! Display information about direct connections

! End of the script file!

Note: To specify a blank password for a user in the configuration script, you must specify it as a space within

quotes. For example, to change the password for user jane from a blank password to hello , the script entry is as

users passwd jane

script apply

This command applies the commands in the script to the switch. The <scriptname> parameter is the name of the script

script apply <scriptname>

Privileged EXEC

script delete

This command deletes a specified script where the <scriptname> parameter is the name of the script to delete. The <all>

option deletes all the scripts present on the switch.

script delete {<scriptname> | all}

Privileged EXEC

This command lists all scripts present on the switch as well as the remaining available space.

Global Config

Configuration

Name of the script.

Privileged EXEC