D-Link DWS-4000 Series Cli Command Reference page 228

D-Link Unified Switch CLI Command Reference
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless agetime <cr>
Ad Hoc Client Statue Age (hours)............... 24
AP Failure Status Age (hours).................. 24
RF Scan Status Age (hours)..................... 24
Detected Clients Age (hours)....................24
show wireless peer-switch configuration
This show command displays the peer switch configuration groups mode.
Format
show wireless peer-switch configuration
Mode Privileged EXEC
Field Description
AP Database Displays whether the AP database configuration push to peer switches is enabled or disabled.
AP Profile Displays whether the AP profile and network configuration push to peer switches is enabled or
disabled.
Channel Power Displays whether the channel and power configuration push to peer switches is enabled or disabled.
Discovery Displays whether the discovery configuration push to peer switches is enabled or disabled.
Global Displays whether the global configuration push to peer switches is enabled or disabled.
Known Client Displays whether the known client database push to peer switches is enabled or disabled.
Captive Portal Displays whether Captive Portal configuration push to peer switches is enabled or disabled.
Radius Client Displays whether RADIUS client configuration push to peer switches is enabled or disabled.
QoS ACL Displays whether QoS ACL configuration push to peer switches is enabled or disabled.
QoS DiffServ Displays whether QoS Diffserv (classes, services, and policies) configuration has been enabled to
push the configuration to peer switches.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless peer-switch configuration
AP Database.................................... Enable
AP Profile..................................... Enable
Channel Power.................................. Enable
Discovery...................................... Disable
Global......................................... Enable
Known Client................................... Enable
Captive Portal................................. Enable
RADIUS Client.................................. Enable
QoS ACL........................................ Enable
QoS DiffServ................................... Enable
show wireless configuration request status
This show command displays the global peer switch configuration push status and configuration push status for all peer
switches.
© 2009 D-Link Corporation. All Rights Reserved
220