Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Format
show ip arp inspection interfaces [slot/port]
Mode
• Privileged EXEC
• User EXEC
Term
Definition
Interface
The interface ID for each displayed row.
Trust State
Whether the interface is trusted or untrusted for DAI.
Rate Limit
The configured rate limit value in packets per second.
Burst Interval
The configured burst interval value in seconds.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show ip arp inspection interfaces
Interface
---------------
0/1
0/2
show arp access-list
Use this command to display the configured ARP ACLs with the rules. Giving an ARP ACL name as the argument will display
only the rules in that ARP ACL.
Format
show arp access-list [acl-name]
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(DWS-4026) #show arp access-list
ARP access list H2
permit ip host 1.1.1.1 mac host 00:01:02:03:04:05
permit ip host 1.1.1.2 mac host 00:03:04:05:06:07
ARP access list H3
ARP access list H4
permit ip host 2.1.1.2 mac host 00:03:04:05:06:08
© 2009 D-Link Corporation. All Rights Reserved
118
Trust State
Rate Limit
(pps)
-----------
----------
Untrusted
Untrusted
Burst Interval
(seconds)
---------------
15
1
10
10
Advertisement
Table of Contents
