D-Link DWS-4000 Series Cli Command Reference page 343

wids-security client threshold-value-auth
Use this command to configure the maximum number of authentication messages a switch can receive during the threshold
interval.
Default 10
Format
wids-security client threshold-value-auth <1-99999>
Mode Wireless Config
Parameter Description
1-99999 The range of the threshold value.
no wids-security client threshold-value-auth
Use this command to set the threshold value for authentication messages to its default.
Format
no wids-security client threshold-value-auth
Mode Wireless Config
wids-security client threshold-interval-auth
Use this command to configure the threshold interval for counting the authentication messages at the switch.
Default 60
Format
wids-security client threshold-interval-auth <1-3600>
Mode Wireless Config
no wids-security client threshold-interval-auth
Use this command to set the threshold value for the authentication interval to its default.
Format
no wids-security client threshold-interval-auth
Mode Wireless Config
wids-security client threshold-value-probe
Use this command to configure the maximum number of probe messages a switch can receive during the threshold interval.
Default 120
Format
wids-security client threshold-value-probe <1-99999>
Mode Wireless Config
Parameter Description
1-99999 The range of the threshold value.
Detected Clients Database Commands
335