D-Link DWS-4000 Series Cli Command Reference page 203

redistribute (RIP)
This command configures RIP protocol to redistribute routes from the specified source protocol/routers. There are five
possible match options. Internal routes are redistributed by default.
Default • metric—not-configured
• match—internal
Format for
redistribute {static | connected} [metric <0-15>]
source
protocol
Mode Router RIP Config
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source protocol/routers.
Format
no redistribute {static | connected} [metric] [match [internal] [external 1]
[external 2] [nssa-external 1] [nssa-external-2]]
Mode Router RIP Config
show ip rip
This command displays information relevant to the RIP router.
Format
show ip rip
Modes • Privileged EXEC
• User EXEC
Term Definition
RIP Admin Mode Enable or disable.
Split Horizon Mode None, simple or poison reverse.
Auto Summary Enable or disable. If enabled, groups of adjacent routes are summarized into single entries, in order to
Mode reduce the total number of entries The default is enable.
Host Routes Enable or disable. If enabled the router accepts host routes. The default is enable.
Accept Mode
Global Route The number of route changes made to the IP Route Database by RIP. This does not include the refresh
Changes of a route's age.
Global queries The number of responses sent to RIP queries from other systems.
Default Metric The default metric of redistributed routes if one has already been set, or blank if not configured earlier.
The valid values are 1 to 15.
Default Route The default route.
Advertise
Routing Information Protocol Commands
195