D-Link DWS-4000 Series Cli Command Reference page 42

D-Link Unified Switch CLI Command Reference
no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the
VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
Format
no vlan ingressfilter
Mode Interface Config
vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to a static VLAN (one that
is permanently configured and defined). The ID is a valid VLAN identification number. VLAN range is 2-3965.
Format
vlan makestatic <2-3965>
Mode VLAN Config
vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32 characters, and the ID is a
valid VLAN identification number. ID range is 1-3965.
Default • VLAN ID 1 - default
• other VLANS - blank string
Format
vlan name <1-3965> <name>
Mode VLAN Config
no vlan name
This command sets the name of a VLAN to a blank string.
Format
no vlan name <1-3965>
Mode VLAN Config
vlan participation
This command configures the degree of participation for a specific interface in a VLAN. The ID is a valid VLAN identification
number, and the interface is a valid interface number.
Format
vlan participation {exclude | include | auto} <1-3965>
Mode Interface Config
Participation options are:
Participation
Definition
Options
include The interface is always a member of this VLAN. This is equivalent to registration fixed.
exclude The interface is never a member of this VLAN. This is equivalent to registration forbidden.
© 2009 D-Link Corporation. All Rights Reserved
34