D-Link DWS-4000 Series Cli Command Reference page 146

D-Link Unified Switch CLI Command Reference
Term Definition
Time To Live The amount of time (in seconds) the remote device's information received in the LLDPDU should be
treated as valid information.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show lldp remote-device detail 0/7
LLDP Remote Device Detail
Local Interface: 0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Port ID Subtype: MAC Address
Port ID: 00:FC:E3:90:01:11
System Name:
System Description:
Port Description:
System Capabilities Supported:
System Capabilities Enabled:
Time to Live: 24 seconds
show lldp local-device
Use this command to display summary information about the advertised LLDP local data. This command can display
summary information or detail for each interface.
Format
show lldp local-device {<slot/port> | all}
Mode Privileged EXEC
Term Definition
Interface The interface in a slot/port format.
Port ID The port ID associated with this interface.
Port Description The port description associated with the interface.
show lldp local-device detail
Use this command to display detailed information about the LLDP data a specific interface transmits.
Format
show lldp local-device detail <slot/port>
Mode Privileged EXEC
Term Definition
Interface The interface that sends the LLDPDU.
Chassis ID The type of identification used in the Chassis ID field.
Subtype
© 2009 D-Link Corporation. All Rights Reserved
138