Peer Unified Switch Commands - D-Link DWS-4000 Series Cli Command Reference

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

D-Link Unified Switch CLI Command Reference
P
U
S
EER
NIFIED
The commands in this section provide peer Unified Switch status.
show wireless peer-switch
This command displays status information for peer Unified Switches. If no parameters are entered, the command will display
summary status for all peer switches. If a peer switch IP address is entered, detailed status for that peer switch is displayed.
Format
show wireless peer-switch [<ipaddr>]
Mode
Privileged EXEC
Field
Description
ipaddr
The <ipaddr> is a valid IP address.
IP Address
IP address of the peer switch.
Vendor ID
The peer switch software vendor ID.
Software Version
Version of WS software on the peer switch.
Protocol Version
Protocol version of WS software on the peer switch.
Discovery Reason Method for peer WS discovery.
Managed AP Count Total number of access points currently managed by the peer switch.
Age
Time since last update was received from the switch.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless peer-switch
IP Address
---------------
10.27.64.222
(DWS-4026) #show wireless peer-switch 10.254.22.1
IP Address.................................... 10.254.22.1
Vendor ID..................................... D-Link
Software Version.............................. D.5.28.1
Protocol Version.............................. 2
Discovery Reason.............................. L2 Poll
Managed AP Count.............................. 3
Age........................................... 0d:00:00:11
show wireless peer-switch configure status
This command displays config push status information for peer Unified Switches. If no parameters are entered, the command
will display summary status for all peer switches. If a peer switch IP address is entered, detailed status for that peer switch
is displayed.
© 2009 D-Link Corporation. All Rights Reserved
234
C
WITCH
OMMANDS
Vendor
Software
ID
Version
------
--------------------
D-Link
D.5.28.1
Protocol
Discovery
Version
Reason
--------
---------
2
L2 Poll
Age
-----------
0d:00:00:18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents