Table of Contents
Advertisement
no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
Format
no dot1x user <user> {<slot/port> | all}
Mode
Global Config
users defaultlogin
This command assigns the authentication login list to use for non-configured users when attempting to log in to the system.
This setting is overridden by the authentication login list assigned to a specific user if the user is configured locally. If this
value is not configured, users will be authenticated using local authentication only.
Format
users defaultlogin <listname>
Mode
Global Config
users login
This command assigns the specified authentication login list to the specified user for system login. The <user> must be a
configured <user> and the <listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the interface from all CLI, web, and telnet
sessions will be blocked until the authentication is complete.
Note that the login list associated with the admin user can not be changed to prevent accidental lockout from the switch.
Format
users login <user> <listname>
Mode
Global Config
show authentication
This command displays the ordered authentication methods for all authentication login lists.
Format
show authentication
Mode
Privileged EXEC
Term
Definition
Authentication
The authentication login listname.
Login List
Method 1
The first method in the specified authentication login list, if any.
Method 2
The second method in the specified authentication login list, if any.
Method 3
The third method in the specified authentication login list, if any.
show authentication users
This command displays information about the users assigned to the specified authentication login list. If the login is assigned
to non-configured users, the user "default" will appear in the user column.
Port-Based Network Access Control Commands
61
Advertisement
Table of Contents
