D-Link DWS-4000 Series Cli Command Reference page 511

Term Definition
SNMP Trap Name The community string of the SNMP trap packet sent to the trap manager. The string is case sensitive
and can be up to 16 alphanumeric characters.
IP Address The IPv4 address to receive SNMP traps from this device.
SNMP Version SNMPv2
Mode The receiver's status (enabled or disabled).
Example: The following shows an example of the CLI command.
(DWS-4026) #show snmptrap
SNMP Trap Name
------------------- --------------- -------------------- ------------- ---------
MyTrap
show trapflags
This command displays trap conditions. You can configure which traps the switch generates by enabling or disabling the
trap condition. If a trap condition is enabled and the condition is detected, the SNMP agent on the switch sends the trap to
all enabled trap receivers. You do not have to reset the switch to implement the changes. Cold and warm start traps are
always generated and cannot be disabled.
Format
show trapflags
Mode Privileged EXEC
Term Definition
Authentication Can be enabled or disabled. The factory default is enabled. Indicates whether authentication failure
Flag traps will be sent.
Link Up/Down Flag Can be enabled or disabled. The factory default is enabled. Indicates whether link status traps will be
sent.
Multiple Users Flag Can be enabled or disabled. The factory default is enabled. Indicates whether a trap will be sent when
the same user ID is logged into the switch more than once at the same time (either through Telnet or
the serial port).
Spanning Tree Flag Can be enabled or disabled. The factory default is enabled. Indicates whether spanning tree traps are
sent.
ACL Traps May be enabled or disabled. The factory default is disabled. Indicates whether ACL traps are sent.
Global Wireless Indicates whether Unified Switch SNMP traps are globally enabled.
Trap Flag
Captive Portal Flag Indicates whether Captive Portal SNMP traps are globally enabled.
IP Address IPv6 Address
192.168.1.100
SNMP Commands
SNMP Version Status
snmpv2 Disable
503