Captive Portal Client Connection Commands - D-Link DWS-4000 Series Cli Command Reference

D-Link Unified Switch CLI Command Reference
C P
APTIVE ORTAL
Use the commands in this section to view information about the clients connected to the captive portals configured on the
switch.
show captive-portal client status
This command displays client connection details or a connection summary for connected captive portal users. Use the
optional [macaddr] keyword, which is the MAC address of a client, to view additional information about that client.
Format
show captive-portal client [macaddr] status
Mode Privileged EXEC
Field Description
Client MAC Identifies the MAC address of the wireless client (if applicable).
Address
Client IP Address Identifies the IP address of the wireless client (if applicable).
Protocol Mode Shows the current connection protocol, which is either HTTP or HTTPS.
Verification Mode Shows the current account type, which is Guest, Local, or RADIUS.
Session Time Shows the amount of time that has passed since the client was authorized.
If you specify a client MAC address, the following additional information displays:
CP ID Shows the captive portal ID the connected client is using.
CP Name Shows the name of the captive portal the connected client is using.
Interface Valid slot and port number separated by a forward slash.
Interface Describes the interface.
Description
User Name Displays the user name (or Guest ID) of the connected client.
If cluster support is available, the following fields display:
Switch MAC Identifies the MAC address of the switch (if applicable).
Address
Switch IP Address Identifies the IP address of the switch (if applicable).
Switch Type (local Shows the current switch type, which is local or peer.
or peer)
show captive-portal client statistics
This command displays the statistics for a specific captive portal client.
Format
show captive-portal client <macaddr> statistics
Mode Privileged EXEC
© 2009 D-Link Corporation. All Rights Reserved
362
C C
LIENT ONNECTION
C
OMMANDS