D-Link DWS-4000 Series Cli Command Reference page 301

Profile........................................ 1 - Default
Vendor ID...................................... D-Link
Protocol Version............................... 2
Software Version............................... D.05.22.1
Hardware Type.................................. 9hw_dwl8600 - DWL-8600AP Dual Radio a/b/
g/n
Serial Number.................................. H05167353
Part Number.................................... dwl8600ap
Discovery Reason............................... L2 Poll Received
Authenticated Clients.......................... 0
System Up Time................................. 0d:00:02:43
Age............................................ 0d:00:00:02#
show wireless ap radio status
This command displays operational status for a WS managed AP radio interface. If no parameters are specified, a summary
of radio status for all managed APs is displayed. If an AP MAC address and radio interface are specified, the detailed status
is displayed.
Format
show wireless ap {<macaddr> radio [<1-2>] status | radio status}
Mode Privileged EXEC
Field Description
macaddr WS managed AP MAC address.
1-2 The radio interface on the AP.
MAC Address The Ethernet address of the WS managed AP.
Location A location description for the AP, this is the value configured in the valid AP database (either locally or
on the RADIUS server).
Radio Indicates the radio interface on the AP.
Channel If the radio is operational, the current operating channel for the radio.
Bandwidth If the radio is operational, the current channel bandwidth in use.
Transmit Power If the radio is operational, the current transmit power for the radio.
Associated Clients Total count of clients associated on the physical radio, this is a sum of all the clients associated to each
VAP enabled on the radio.
Total Neighbors Total number of neighbors (both APs and clients) that can be seen by this radio in its RF area.
Supported The list of eligible channels the AP reported to the switch for channel assignment. This list is based on
Channels country code, hardware capabilities, and any configured channel limitations.
Fixed Channel This flag indicates if a fixed channel is configured and assigned to the radio. A fixed channel can be
Indicator configured in the valid AP database (locally or on a RADIUS server).
Manual Channel Indicates the current state of a manual request to change the channel on this radio.
Adjustment Status
Fixed Power This flag indicates if a fixed power setting is configured and assigned to the radio. A fixed transmit
Indicator power can be configured in the valid AP database (locally or on a RADIUS server).
Manual Power Indicates the current state of a manual request to change the power setting on this radio.
Adjustment Status
WLAN Utilization Indicates the total network utilization for the physical radio. This value is based on radio statistics.
WS Managed Access Point Commands
293