D-Link DWS-4000 Series Cli Command Reference page 363

no max-input-octets
This command sets to the default the maximum number of octets the user is allowed to transmit.
Format
no max-input-octets
Mode Captive Portal Instance
max-output-octets
This command configures the maximum number of octets the user is allowed to receive. After this limit has been reached
the user will be disconnected. If the value is set to 0 then the limit is not enforced.
Default 0
Format
max-output-octets <bytes>
Mode Captive Portal Instance
Parameter Description
bytes Output octets in bytes. 0 indicates limit not enforced.
no max-output-octets
This command sets to the default the maximum number of octets the user is allowed to receive.
Format
no max-output-octets
Mode Captive Portal Instance
max-total-octets
This command configures the maximum number of octets the user is allowed to transfer, i.e., the sum of octets transmitted
and received. After this limit has been reached the user will be disconnected. If the value is set to 0, then the limit is not
enforced.
Default 0
Format
max-total-octets <bytes>
Mode Captive Portal Instance
Parameter Description
bytes Total octets in bytes. 0 indicates limit not enforced.
no max-total-octets
This command sets to the default the maximum number of octets the user is allowed to transfer, i.e., the sum of octets
transmitted and received.
Captive Portal Configuration Commands
355