Accessing The Cli - D-Link DWS-4000 Series Cli Command Reference

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

Accessing the CLI

A
CLI
CCESSING THE
You can access the CLI by using a direct console connection or by using a telnet or SSH connection from a remote
management host.
For the initial connection, you must use a direct connection to the console port. You cannot access the system remotely until
the system has an IP address, subnet mask, and default gateway. You can set the network configuration information
manually, or you can configure the system to accept these settings from a BOOTP or DHCP server on your network. For
more information, see
"Network Interface Commands" on page
473.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents