Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Field
Description
Authenticated
Total number of clients in the associated client database with an "Authenticated" status.
Clients
Maxumum
Maximum number of clients that can associate with the wireless system. This is the maximum number
Associated Clients
of entries allowed in the Associated Client database.
Detected Clients
The total number of detected clients in the database.
Maximum Detected
The maximum number of detected clients that can be stored in the database.
Clients
Peer Switches
Total number of peer WLAN switches detected on the network.
Unknown Access
Total number of APs currently detected but not known to the switch. These includes rogue APs and
Points
APs not connected to the network.
Rogue Access
Total number of rogue APs currently detected on the WLAN.
Points
Standalone Access
Total number of trusted APs in standalone mode.
Points
Distributed Tunnel
Number of clients that are currently sending and receiving packets via distributed tunnels.
Clients
WLAN Utilization
Total network utilization across all APs managed by this switch, this is an average of the global
statistics received from each AP.
Maximum Pre-
Maximum number of Client Pre-Authentication events that can be recorded by the system.
authentication
History Entries
Total Pre-
Current number of pre-authentication history entries in use by the system.
authentication
History Entries
Maximum Roam
Maximum number of entries that can be recorded in the roam history for all detected clients.
History Entries
Total Roam History
Current number of roam history entries in use by the system.
Entries
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless status
Total Access Points............................ 0
Managed Access Points.......................... 0
Connection Failed Access Points................ 0
Discovered Access Points....................... 0
Maximum Managed APs in Peer Group.............. 256
Rogue AP Mitigation Count...................... 0
Rogue AP Mitigation Limit...................... 16
Total Clients.................................. 0
Authenticated Clients.......................... 0
Maximum Associated Clients..................... 8000
Detected Clients............................... 0
Maximum Detected Clients....................... 16000
Peer Switches.................................. 1
Unknown Access Points.......................... 0
Rogue Access Points............................ 0
Standalone Access Points....................... 0
Distributed Tunnel Clients..................... 0
WLAN Utilization............................... 0 %
© 2009 D-Link Corporation. All Rights Reserved
214
Advertisement
Table of Contents
