D-Link DWS-4000 Series Cli Command Reference page 320

D-Link Unified Switch CLI Command Reference
Field Description
Channel Indicates the operating channel for the client association.
Status Indicates whether or not the client has associated and/or authenticated. The valid values are:
• Associated - The client is currently associated to the managed AP.
• Authenticated - The client is currently associated and authenticated to the managed AP.
• Disassociated - The client has disassociated from the managed AP. If the client does not roam to
another managed AP within the client roam timeout, it will be deleted.
AP MAC Address This field indicates the base AP Ethernet MAC address for the managed AP.
Location The descriptive location configured for the managed AP.
Radio Displays the managed AP radio interface on which the client is associated.
VLAN If the client is on a VAP using VLAN data forwarding mode, indicates the current assigned VLAN.
User Name Indicates the user name of clients that have authenticated via 802.1x. Clients on networks with other
security modes will not have a user name.
Transmit Data Rate Indicates the rate at which the client station is currently transmitting data.
802.11n-Capable For current association, this flag indicates whether the client is capable of 802.11n operation.
Inactive Period For current association, the period of time that the AP has not seen any traffic for the client.
Age Indicates the time in seconds since the switch received new status or statistics update for this client.
Network Time Indicates the time since the client first authenticated with the network.
Example: The following shows example CLI display output for the command.
On the Cluster Controller the summary command displays entries in the following format:
(DWS-4026) #show wireless client status
MAC Address
(*) Peer Managed
------------------ ----------------- ----------------- --------- --------------
*00:0F:B5:86:93:95 00:00:86:00:50:00 l7network
00:0F:B5:88:93:95 00:00:88:00:50:00 l7network
(DWS-4026) #
On the switch that is not acting as a Cluster controller the summary command displays
entries in the following format:
(DWS-4026) #show wireless client status
MAC Address
------------------ ----------------- ----------------- --------- --------------
00:0F:B5:86:93:95 00:00:86:00:50:00 l7network
(DWS-4026) #
Example: The following shows CLI display output for a particular MAC address:
(DWS-4026) #show wireless client 00:14:6c:59:d1:99 status
MAC address.................................... 00:14:6C:59:D1:99
Detected IP Address............................ -----
Detected IP Address............................ -----
VAP MAC Address................................ 00:02:BC:00:17:D0
AP MAC Address................................. 00:02:BC:00:17:D0
© 2009 D-Link Corporation. All Rights Reserved
312
VAP MAC Address
VAP MAC Address
SSID Status
Auth
Auth
SSID Status
Auth
Network Time
0d:01:09:52
0d:01:09:52
Network Time
0d:01:09:52