D-Link DWS-4000 Series Cli Command Reference page 442

D-Link Unified Switch CLI Command Reference
Received response for icmp_seq = 0. time = 275268 usec
Received response for icmp_seq = 1. time = 274009 usec
Received response for icmp_seq = 2. time = 279459 usec
----10.254.2.160 PING statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (msec) min/avg/max = 274/279/276
Example: ping failure:
In Case of Unreachable Destination:
(DWS-4026) # ping 192.168.254.222 count 3 interval 1 size 255
Pinging 192.168.254.222 with 255 bytes of data:
Received Response: Unreachable Destination
Received Response :Unreachable Destination
Received Response :Unreachable Destination
----192.168.254.222
3 packets transmitted,3 packets received, 0% packet loss
round-trip (msec) min/avg/max = 0/0/0
In Case Of Request TimedOut:
(DWS-4026) # ping 1.1.1.1 count 1 interval 3
Pinging 1.1.1.1 with 0 bytes of data:
----1.1.1.1 PING statistics----
1 packets transmitted,0 packets received, 100% packet loss
round-trip (msec) min/avg/max = 0/0/0
quit
This command closes the current telnet connection or resets the current serial connection. The system asks you whether to
save configuration changes before quitting.
Format
quit
Modes • Privileged EXEC
• User EXEC
reload
This command resets the switch without powering it off. Reset means that all network connections are terminated and the
boot code executes. The switch uses the stored configuration to initialize the switch. You are prompted to confirm that the
reset should proceed. The LEDs on the switch indicate a successful reset.
Format
reload
Mode Privileged EXEC
copy
The copy command uploads and downloads files to and from the switch. You can also use the copy command to manage
the dual images (image1 and image2) on the file system. Upload and download files from a server by using TFTP or
© 2009 D-Link Corporation. All Rights Reserved
434
PING statistics----