D-Link DWS-4000 Series Cli Command Reference page 186

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

D-Link Unified Switch CLI Command Reference
ip irdp holdtime
This command configures the value, in seconds, of the holdtime field of the router advertisement sent from this interface.
The holdtime range is the value of <maxadvertinterval> to 9000 seconds.
Default
3 * maxinterval
Format
ip irdp holdtime <maxadvertinterval-9000>
Mode
Interface Config
no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router advertisement sent from this
interface.
Format
no ip irdp holdtime
Mode
Interface Config
ip irdp maxadvertinterval
This command configures the maximum time, in seconds, allowed between sending router advertisements from the
interface. The range for maxadvertinterval is 4 to 1800 seconds.
Default
600
Format
ip irdp maxadvertinterval <4-1800>
Mode
Interface Config
no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
Format
no ip irdp maxadvertinterval
Mode
Interface Config
ip irdp minadvertinterval
This command configures the minimum time, in seconds, allowed between sending router advertisements from the interface.
The range for minadvertinterval is three to the value of maxadvertinterval.
Default
0.75 * maxadvertinterval
Format
ip irdp minadvertinterval <3-maxadvertinterval>
Mode
Interface Config
no ip irdp minadvertinterval
This command sets the default minimum time to the default.
Format
no ip irdp minadvertinterval
Mode
Interface Config
© 2009 D-Link Corporation. All Rights Reserved
178

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents