D-Link DWS-4000 Series Cli Command Reference page 348

D-Link Unified Switch CLI Command Reference
show wireless client detected-client status
Use this command to display status information for detected clients. If you do not enter a parameter, the command displays
summary status for all detected clients in the database. if you enter a client MAC address, the command displays detailed
status for that detected client.
Format
show wireless client <macaddr> detected-client status
Mode Privileged EXEC
Field Description
MAC Address The Ethernet address of the client.
OUI The organizationally unique identifier for the wireless client.
Client Status The detected client status.
Auth Status Shows whether the client is authenticated or not.
Time Since Last Time since entry was last updated.
Updated
Threat Detection Shows if the threat detection test is triggered for this client.
Threat Mitigation Shows if threat mitigation has been done for this client.
Client Name Shows the name of the client.
Time Since Created Time since entry was created.
Channel Channel in which the client is detected.
Auth RSSI RSSI reported by the managed AP with which the client is authenticated.
Auth Signal Signal strength reported by the managed AP with which the client is authenticated.
Auth Noise Noise reported by the managed AP with which the client is authenticated.
Probe Req Number of probe requests during the collection interval.
Probe Collection The time remaining in the probe collection interval.
Interval
Highest Num The largest number of probes that the switch detected during the collection interval.
Probes
Auth Req The number of 802.11 authentication messages recorded so far during the probe collection interval.
Auth Collection The amount of time left before the authentication collection interval is done and the switch decides
Interval whether the client is a threat.
Highest Num Auth The largest number of authentications that the switch detected during the collection interval.
Msgs
DeAuth Req The number of 802.11 de-authentication messages recorded so far during the probe collection interval.
DeAuth Collection The amount of time left before the de-authentication collection interval is done and the switch decides
Interval whether the client is a threat.
Highest Num The largest number of de-authentications that the switch detected during the collection interval.
DeAuth Msgs
Num Auth Failures The number of 802.1X authentication failures detected for this client.
Total Probe The number of probes detected in the last RF Scan.
Messages
Broadcast BSSID The number of probes to broadcast BSSID in the last RF Scan.
Probes
© 2009 D-Link Corporation. All Rights Reserved
340