D-Link DWS-4000 Series Cli Command Reference page 93

lacp partner admin state
Use this command to configure the current administrative value of actor state for the protocol Partner. The valid value range
is 0x00-0xFF.
Default 0x07
Format
lacp partner admin state {individual|longtimeout|passive}
Mode Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner admin state
Use this command the configure the default current administrative value of actor state for the protocol partner.
Format
no lacp partner admin state {individual|longtimeout|passive}
Mode Interface Config
lacp partner admin state individual
Use this command to set LACP partner admin state to individual.
Format
lacp partner admin state individual
Mode Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner admin state individual
Use this command to set the LACP partner admin state to aggregation.
Format
no lacp partner admin state individual
Mode Interface Config
lacp partner admin state longtimeout
Use this command to set LACP partner admin state to longtimeout.
Format
lacp partner admin state longtimeout
Mode Interface Config
Port-Channel/LAG (802.3ad) Commands
85