Table 6: Cli Mode Access And Exit - D-Link DWS-4000 Series Cli Command Reference

Command Mode Prompt
AP Config Mode
DWS-4026 (Config-ap)#
AP Profile Config Mode
DWS-4026 (Config-ap-profile)#
AP Profile Radio Config
DWS-4026 (Config-ap-profile-radio)#
Mode
AP Profile VAP Config
DWS-4026 (Config-ap-profile-vap)#
Mode
Network Config Mode
DWS-4026 (Config-network)#
ARP Access-List Config
DWS-4026 (Config-arp-access-list)#
Mode
Captive Portal Config Mode
DWS-4026 (Config-CP)#
Captive Portal Instance
DWS-4026 (Config-CP 1)#
Mode
Table 6 explains how to enter or exit each mode.
Command Mode Access Method
User EXEC This is the first level of access.
Privileged EXEC From the User EXEC mode, enter
enable
Global Config From the Privileged EXEC mode, enter
configure
VLAN Config From the Privileged EXEC mode, enter
vlan database
Interface Config From the Global Config mode, enter
interface <slot/port>
interface loopback <id>
Line Config From the Global Config mode, enter
lineconfig
Policy-Map Config From the Global Config mode, enter
policy-map
Policy-Class-Map Config From the Policy Map mode enter
Class-Map Config From the Global Config mode, enter
class-map
and specify the optional keyword
protocol for this class. See
information.
Router RIP Config From the Global Config mode, enter
router rip
MAC Access-list Config From the Global Config mode, enter
mac access-list extended <name>
TACACS Config From the Global Config mode, enter
tacacs-server host <ip-addr>
where
on your network.
DHCP Pool From the Global Config mode, enter
Config
ip dhcp pool <pool-name>
Table 5: CLI Command Modes (Cont.)

Table 6: CLI Mode Access and Exit

or
.
class
ipv4
"class-map" on page 382
.
<ip-addr>
is the IP address of the TACACS server
Mode Description
Contains commands to configure entries in the local AP database,
which is used for AP validation.
Contains commands to configure the default AP profile settings as
well as settings for new AP profile.
Contains commands to modify the radio configuration parameters
for an AP profile.
Contains commands to configure radio 1 or radio 2 within an AP
profile.
Contains commands to configure WLAN settings for up to 64
different networks.
Contains commands to add ARP ACL rules in an ARP Access List.
Contains commands to configure global captive portal settings.
Contains commands to configure a captive portal instance.
Exit or Access Previous Mode
To exit, enter
To exit to the User EXEC mode, enter
Z.
To exit to the Privileged EXEC mode, enter
Ctrl-Z
To exit to the Privileged EXEC mode, enter
Ctrl-Z
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
or
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
. To exit to the Policy Map mode, enter
Privileged EXEC mode, enter
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
to specify the Layer 3
for more
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
.
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
.
Command Modes
logout
.
exit
.
.
exit
Ctrl-Z
.
exit
Ctrl-Z
.
exit
Ctrl-Z
.
exit
Ctrl-Z
.
exit
Ctrl-Z
.
exit
Ctrl-Z
.
exit
Ctrl-Z
.
exit
Ctrl-Z
.
exit
Ctrl-Z
.
Ctrl-
or press
exit
, or press
exit
, or press
. To return to the
. To return to the
. To return to the
. To return to the
. To return to the
. To return to the
. To return to the
. To return to the
. To return to the
7