D-Link DWS-4000 Series Cli Command Reference page 451

no client-name
This command removes the client name.
Format
no client-name
Mode DHCP Pool Config
default-router
This command specifies the default router list for a DHCP client. {address1, address2... address8} are valid IP
addresses, each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default none
Format
default-router <address1> [<address2>....<address8>]
Mode DHCP Pool Config
no default-router
This command removes the default router list.
Format
no default-router
Mode DHCP Pool Config
dns-server
This command specifies the DNS servers available to a DHCP client. Address parameters are valid IP addresses; each
made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default none
Format
dns-server <address1> [<address2>....<address8>]
Mode DHCP Pool Config
no dns-server
This command removes the DNS Server list.
Format
no dns-server
Mode DHCP Pool Config
hardware-address
This command specifies the hardware address of a DHCP client. Hardware-address is the MAC address of the hardware
platform of the client consisting of 6 bytes in dotted hexadecimal format. Type indicates the protocol of the hardware platform.
It is 1 for 10 MB Ethernet and 6 for IEEE 802.
Default ethernet
Format
hardware-address <hardwareaddress> <type>
Mode DHCP Pool Config
DHCP Server Commands
443